Fall Savers Wireless Monitor
- Central wireless monitor unit for the Fall Savers fall prevention system, receiving wireless alerts from all compatible Fall Savers sensor pads and transmitters - bed sensors, chair sensors and floor sensors - and providing immediate audible notification to care staff when a sensor is triggered, enabling rapid response before a fall occurs.
- Wireless signal reception from paired Fall Savers sensors eliminates the trailing cables between the monitoring location and the staff alert point, supporting CQC Regulation 10 (Dignity and Respect) by enabling silent or low-volume monitoring that does not disturb the patient or draw attention to monitoring equipment in the care environment.
- Compatible with the complete Fall Savers accessory range including wireless bed sensor pads, chair sensor pads, floor sensor pads, foldable sensor mats, door and window transmitters and call button accessories, providing a single central monitor that scales across the full range of monitoring configurations as patient needs change.
- Flexible placement without cable constraints, allowing the monitor to be positioned in the staff area, corridor or nursing station best suited to alert reception, rather than being physically located at the patient monitoring point - supporting the care team's workflow and response protocols across care home and ward environments.
Fall Savers Wireless Monitor: Central Alert Receiver for the Complete Fall Savers Sensor System
The Fall Savers Wireless Monitor is the central receiving unit for the Fall Savers fall prevention ecosystem, providing audible staff alerts when any compatible paired Fall Savers sensor detects a patient movement event. Compatible with the full range of Fall Savers wireless sensors - bed pads, chair pads, floor sensors, foldable mats, door transmitters and call buttons - the monitor provides a single, consistent alert output point for multiple monitoring configurations. Wireless signal reception from paired sensors removes the cable constraint that limits wired monitors to a fixed position near the patient, enabling the monitor to be placed where care staff will most reliably receive the alert.
Product Specifications
| Specification | Detail |
|---|---|
| Product Code | NCL-51000 |
| Function | Wireless alert receiver for Fall Savers sensor system |
| Compatible With | All Fall Savers wireless sensor accessories |
| Signal Type | Wireless - no cable between sensor and monitor |
| Placement | Flexible - staff area, corridor or nursing station |
| Application | Care homes, NHS wards, home care environments |
Clinical and Regulatory Compliance
NICE Guideline NG147 (Falls in Older People) identifies timely carer response as the primary clinical mechanism for preventing a sensor-detected movement event from becoming a fall: the Fall Savers Wireless Monitor is the device that delivers the alert enabling that response. The monitor's wireless signal reception means it can be positioned at the point where care staff are most likely to receive and act on an alert - the nursing station, the staff room or the corridor outside the patient's room - rather than being constrained to the patient's immediate environment by a cable connection. CQC Regulation 12 (Safe Care and Treatment) requires that fall prevention monitoring is functionally effective: a monitor that staff cannot hear or access promptly does not meet this standard. CQC Regulation 10 (Dignity and Respect) is supported by the wireless alert routing: the monitor can be positioned away from the patient, allowing the patient's room to remain free from audible alarm sounds that disturb sleep or agitate patients with dementia or sensory sensitivity.
Frequently Asked Questions
How many Fall Savers sensors can be paired with a single Wireless Monitor?
The Fall Savers Wireless Monitor is designed to pair with compatible Fall Savers wireless sensors and transmitters within its reception range. For specific multi-sensor pairing capacity and any limits on the number of simultaneously paired devices, refer to the product documentation supplied with the monitor. In care environments where monitoring of multiple patients from a single point is required, multiple monitors can be used - one per monitored location - with each monitor receiving alerts only from its own paired sensors. This maintains alert source clarity: when the monitor sounds, care staff know which paired sensor triggered it, enabling targeted response to the correct patient location.
Is the Fall Savers Wireless Monitor compatible with Alerta wireless sensors, or only Fall Savers accessories?
The Fall Savers Wireless Monitor is designed for use within the Fall Savers product ecosystem and pairs with Fall Savers wireless sensors and transmitters. It is not cross-compatible with Alerta wireless sensors, which use the Alerta Wall Point Receiver as their paired monitor unit. The two systems use different proprietary wireless pairing protocols. Care homes using both Fall Savers and Alerta products should treat each as a separate monitoring system with its own receiver unit. Both systems are fully functional within their own ecosystems and can be deployed alongside each other in the same care environment without signal interference between the two systems.
Part of our comprehensive Patient Sensor Alarms range. Wireless patient alarms provide flexible, cable-free fall prevention and resident safety monitoring across care homes and home care settings.
NCL-51000
16 other products in the same category:
- Central wireless monitor unit for the Fall Savers fall prevention system, receiving wireless alerts from all compatible Fall Savers sensor pads and transmitters - bed sensors, chair sensors and floor sensors - and providing immediate audible notification to care staff when a sensor is triggered, enabling rapid response before a fall occurs.
- Wireless signal reception from paired Fall Savers sensors eliminates the trailing cables between the monitoring location and the staff alert point, supporting CQC Regulation 10 (Dignity and Respect) by enabling silent or low-volume monitoring that does not disturb the patient or draw attention to monitoring equipment in the care environment.
- Compatible with the complete Fall Savers accessory range including wireless bed sensor pads, chair sensor pads, floor sensor pads, foldable sensor mats, door and window transmitters and call button accessories, providing a single central monitor that scales across the full range of monitoring configurations as patient needs change.
- Flexible placement without cable constraints, allowing the monitor to be positioned in the staff area, corridor or nursing station best suited to alert reception, rather than being physically located at the patient monitoring point - supporting the care team's workflow and response protocols across care home and ward environments.