Alerta Lomond Standard Bed, Walnut Finish, Electric Profiling, Trendelenburg Feature
- Height and Positioning - adjusts from 40 to 80cm with 5-inch braking castors and a 10-function lockable handset controlling backrest, leg rest, Trendelenburg and reverse Trendelenburg positioning.
- 200kg SWL - with 102x213cm outer dimensions; 4-section articulated platform with anti-slip grip surface and an integrated transport system for safe inter-ward transfers.
- Accessory Compatibility - compatible with Lomond extra-high side rails and 20cm extension kit (sold separately); tool-free assembly and dismantling simplifies setup in hospital and residential care environments.
- BS EN 60601-2-52 Compliance - medical bed safety standard; 3-year frame warranty and 2-year warranty on motors and electrics; walnut finish for home-appropriate aesthetics in residential placements.
Alerta Lomond Standard Bed - Electric Profiling Bed for Hospital and Residential Care
The Alerta Lomond Standard Bed is a four-section electric profiling bed for hospital wards, care homes and residential care settings where a wider height adjustment range and heavier-duty castor specification are required. The 40-80cm height range and 5-inch braking castors support use across clinical environments with higher-traffic corridor transfer requirements. Trendelenburg and reverse Trendelenburg positioning, a 200kg SWL and a 10-function lockable handset provide the full clinical positioning range for acute and sub-acute care needs.
Specifications
| Specification | Detail |
|---|---|
| Height Range | 40-80cm |
| Maximum SWL | 200kg |
| Mattress Platform | 90x200cm |
| Outer Dimensions | 102x213cm |
| Platform Sections | 4-section with anti-slip grip surface |
| Castor Size | 5-inch braking castors |
| Handset | 10-function, lockable |
| Positioning | Trendelenburg, Reverse Trendelenburg, Backrest, Leg Rest |
| Transport | Integrated transport system |
| Compatible Accessories | Extra-high side rails, 20cm extension kit (sold separately) |
| Assembly | Tool-free assembly and dismantling |
| Finish | Walnut |
| Warranty | 3-year frame; 2-year motors and electrics |
Regulatory Compliance
The Lomond Standard Bed meets BS EN 60601-2-52 requirements for medical electrical equipment in medical bed applications. The 40-80cm height adjustment range supports MHOR 1992 manual handling guidance by enabling carers to position the bed at an ergonomically appropriate working height during care tasks. The 10-function lockable handset supports CQC Regulation 12 (Safe Care and Treatment) through precise positioning for pressure care, respiratory management and post-operative recovery. Where side rails are fitted, MHRA bed rail safety guidance requires a documented risk assessment covering the seven entrapment zones and, where applicable, a Mental Capacity Act 2005 assessment prior to fitting.
Frequently Asked Questions
Is the Lomond Standard Bed suitable for home use?
The Lomond Standard Bed is primarily specified for hospital wards and residential care homes. Its 40cm minimum height and 5-inch castors are optimised for clinical environments with higher-traffic transfer corridors. For domestic community care settings where a lower floor profile is required, the Lomond Community Bed (30cm minimum height, 3-inch castors) is the more appropriate specification.
Does the Lomond Standard Bed support taller patients?
The standard mattress platform is 90x200cm. For patients requiring additional length, the Lomond 20cm Extension Kit (sold separately) extends the mattress platform by 20cm. The corresponding Foam Mattress Extension Insert fills the extended section; both are available as separate accessories and are compatible with the full Lomond Standard Bed range.
Part of our comprehensive Medical Beds and Accessories range. Standard profiling beds provide electrically adjustable positioning for care home residents and home care patients.
NCL-ALT-LB-SW
Viewed products
2 other products in the same category:
- Height and Positioning - adjusts from 40 to 80cm with 5-inch braking castors and a 10-function lockable handset controlling backrest, leg rest, Trendelenburg and reverse Trendelenburg positioning.
- 200kg SWL - with 102x213cm outer dimensions; 4-section articulated platform with anti-slip grip surface and an integrated transport system for safe inter-ward transfers.
- Accessory Compatibility - compatible with Lomond extra-high side rails and 20cm extension kit (sold separately); tool-free assembly and dismantling simplifies setup in hospital and residential care environments.
- BS EN 60601-2-52 Compliance - medical bed safety standard; 3-year frame warranty and 2-year warranty on motors and electrics; walnut finish for home-appropriate aesthetics in residential placements.