Marsden CC-605 Carry Case, Padded Carry Case for M-605 Hoist Weighing Attachment
- Padded carry case for the Marsden M-605 Class III and MDD Approved hoist weighing attachment, protecting this LOLER-relevant clinical component during transport between clinical areas and community settings where the M-605 is used for hoist-based patient weighing.
- Provides protected carry for the M-605 attachment between hoist locations, preventing the indicator damage and load cell impact that can occur when the M-605 is transported loose in a clinical bag or equipment drawer between hoist weighing sessions in different patient rooms or wards.
- Keeps the M-605 organised and immediately accessible for NHS nursing staff and care home practitioners who need to deploy the hoist scale quickly at the patient location without searching through general clinical equipment for individual M-605 components.
- Compact case consistent with the M-605's clinical portability advantage, adding protected carry for transport without significantly increasing the handling burden for clinical staff who carry the M-605 as part of a broader patient care equipment kit.
Marsden CC-605 Carry Case: Padded Protective Case for M-605 Hoist Weighing Attachment
The Marsden CC-605 is a padded carry case for the M-605 Class III and MDD Approved hoist weighing attachment, providing organised, protected transport for this clinical component between patient rooms, wards and care home locations where the M-605 is deployed for hoist-based patient weighing. The M-605 is a precision clinical instrument whose load cell and indicator electronics require protection from the impacts and vibration of routine transport in clinical bags and trolleys: the CC-605 case provides this protection in a compact format consistent with the M-605's lightweight portable design.
For NHS wards and care homes operating the M-605 as a shared resource across multiple hoist locations, the CC-605 case enables rapid deployment at each patient location without unpacking from a general clinical bag, reducing setup time per patient during care rounds.
Product Specifications
| Specification | Detail |
|---|---|
| Compatible Scale | Marsden M-605 hoist weighing attachment |
| Construction | Padded for impact and vibration protection |
| Design | Compact, purpose-sized for M-605 attachment |
| Clinical Benefit | Protects LOLER-relevant clinical component during transport |
| Deployment | NHS wards and care homes, multi-location hoist weighing |
Clinical and LOLER Compliance
The M-605 is a Class III and MDD Approved hoist weighing attachment used in LOLER-compliant patient hoist transfer workflows. LOLER (Lifting Operations and Lifting Equipment Regulations 1998) requires that lifting attachments are maintained in good working order and inspected regularly. Maintaining the M-605 in a dedicated carry case between uses supports its physical condition and contributes to the equipment maintenance standard expected under LOLER by reducing the impact and wear that accumulate when clinical attachments are transported loose in general clinical bags. The CC-605 case also simplifies the pre-use visual inspection recommended before each LOLER deployment, as the M-605 is stored in a clean, protected state ready for inspection rather than mixed with other clinical items that could obscure damage or contamination.
Frequently Asked Questions
Does the CC-605 case also fit the M-600 hoist weighing attachment?
No. The CC-605 is purpose-sized for the M-605, which is 10cm wider than the M-600. The M-600 has its own dedicated carry case, the CC-600, which is sized for the M-600's narrower dimensions. Using the CC-605 for the M-600 would result in an oversized case that does not provide the snug fit required for effective impact protection during transport. Always use the carry case designated for the specific hoist attachment model in use.
Should the M-605 carry case be disinfected between patient uses as part of infection control?
The carry case exterior may require cleaning if it has come into contact with the clinical environment during a hoist weighing session, in accordance with local NHS infection control policy. The M-605 attachment itself should be cleaned between patients as specified in Marsden's cleaning instructions for the M-605. The CC-605 case is used for transport between locations rather than during the clinical weighing process itself, reducing its direct contamination risk compared with the M-605 attachment. Consult your local NHS infection control team for specific guidance on cleaning requirements for scale carry cases in your clinical environment.
Part of our Class III approved Medical Scales and Measuring range. Medical scale accessories ensure accurate calibration and optimal performance of clinical weighing equipment across care settings.
NCL-CC605CASE
16 other products in the same category:
- Padded carry case for the Marsden M-605 Class III and MDD Approved hoist weighing attachment, protecting this LOLER-relevant clinical component during transport between clinical areas and community settings where the M-605 is used for hoist-based patient weighing.
- Provides protected carry for the M-605 attachment between hoist locations, preventing the indicator damage and load cell impact that can occur when the M-605 is transported loose in a clinical bag or equipment drawer between hoist weighing sessions in different patient rooms or wards.
- Keeps the M-605 organised and immediately accessible for NHS nursing staff and care home practitioners who need to deploy the hoist scale quickly at the patient location without searching through general clinical equipment for individual M-605 components.
- Compact case consistent with the M-605's clinical portability advantage, adding protected carry for transport without significantly increasing the handling burden for clinical staff who carry the M-605 as part of a broader patient care equipment kit.