Olympic Patient Mover - dignified transport and mobility support for residents across care settings.
- Rotating Padded Seats for Transfer Access Without Standing - the Olympic Patient Mover's rotating padded seats allow the resident to transfer from a chair, bed, or wheelchair onto the mover by pivoting onto the seat rather than needing to stand fully; the seat rotates to face the origin surface for transfer-on and then rotates to the travel position for transport; this seated transfer approach reduces the weight-bearing demand on the resident during transfer compared to full standing transfer aids, making the mover appropriate for a wider range of residents including some who cannot weight-bear sufficiently for a standing transfer.
- Eye-Level Contact for Dignity and Communication - a distinctive clinical and dignity benefit of the Olympic Patient Mover over a wheelchair is that the resident is positioned at a higher, more forward-facing seated position that allows them to make eye contact with carers and other people at a similar level; a standard wheelchair positions the resident lower and further back in the room, which can create a communication and social participation barrier; the Patient Mover's higher, more upright seating position supports the resident's sense of participation and human connection during transport, directly addressing CQC Regulation 10 requirements for dignity and respect in care.
- Total-Lock Castors and Manual Leg Spreader for Stable Manoeuvring - the total-lock castors provide a full wheel and swivel lock that prevents the mover from moving in any direction during transfers and during the resident's seated use of the device; the manual leg spreader adjusts the base width for furniture access and narrows for transport through doorways; the turning radius of 1125mm accommodates manoeuvring in care home corridors and room layouts without requiring significant floor space for repositioning.
- 185kg SWL - Mackworth Belt Compatible - PUWER 1998 - NCL-HLA046 - SWL 185kg (29 stone); compatible with Mackworth Back Support Belt in S, M, L, XL sizes; length 1500mm, width 650mm, external width with legs open 1060mm; PUWER 1998 competency training required; MHOR 1992 risk assessment for each resident; the device is a mobility and transfer aid rather than a hoist and is not subject to LOLER 1998; product code NCL-HLA046.
Olympic Patient Mover - 185kg SWL - Rotating Seats - Total-Lock Castors - Eye-Level Dignity Transfer
The Olympic Patient Mover provides on-site patient transfer and short-distance transport with rotating padded seats for wheelchair-level transfer access, a deep knee support, and a higher seating position that maintains eye-level contact with carers for dignity and communication. Total-lock castors and manual leg spreader for stable furniture access. Compatible with Mackworth Back Support Belt. SWL 185kg. Length 1500mm. Not subject to LOLER 1998. PUWER 1998 and MHOR 1992 apply. NCL-HLA046.
Specifications
| Specification | Detail |
|---|---|
| Safe Working Load | 185kg (29 stone) |
| Length | 1500mm |
| Width | 650mm |
| External Width (Legs Open) | 1060mm |
| Turning Radius | 1125mm |
| Seats | Rotating padded - transfer access without full standing |
| Knee Support | Deep padded |
| Leg Adjustment | Manual spreader |
| Castors | Total-lock |
| Belt Compatibility | Mackworth Back Support Belt - S, M, L, XL |
| Reference | NCL-HLA046 |
| Compliance | PUWER 1998; MHOR 1992 (not subject to LOLER 1998) |
Regulatory Compliance
The Olympic Patient Mover is a mobility and transfer aid, not a hoisting device, and is not subject to LOLER 1998. PUWER 1998 requires competency training documentation for all staff using the device. MHOR 1992 requires a manual handling risk assessment for each resident, confirming the 185kg SWL is not exceeded and the transfer configuration is safe. CQC Regulation 12 compliance documentation must include competency training records, and the CQC Regulation 10 dignity standard is directly supported by the device's eye-level seating position. Equipment records must include the product code and belt sizes for each resident.
Frequently Asked Questions
How does the Olympic Patient Mover differ from a wheelchair, and when is each more appropriate?
A wheelchair is primarily a mobility device designed for seated transport over longer distances and for extended periods; it typically has a reclined seating position, back and head support, and is designed for the resident to be pushed by a carer or to self-propel. The Olympic Patient Mover is designed for short-distance on-site transfer and transport within a care environment - between a bedroom and a bathroom, between a bed and a chair, or within a ward or facility; it is not appropriate for extended journeys or outdoor use. The Patient Mover's rotating seats and higher seating position make it better suited to transfers from specific surfaces (beds, chairs, toilets) where the rotating seat reduces the transfer effort compared to a wheelchair transfer; but the device lacks the back support and head support of a wheelchair, making it unsuitable for residents who need postural support during transport. The eye-level seating and face-forward position of the Patient Mover is more appropriate for short social interactions during transfers than a wheelchair's reclined position. For residents who need both on-site transfer capability and extended mobility or outdoor access, both a Patient Mover and a wheelchair may be required for different aspects of their care.
What is the Mackworth Back Support Belt and when is it used with the Patient Mover?
The Mackworth Back Support Belt is a wide belt worn around the resident's back and pelvis that provides the carer with grip points for controlling the resident's upper body during transfer onto and off the Patient Mover. Unlike a narrow gait belt that encircles the waist, the Mackworth belt has a broader contact surface that distributes the grip force across the back and lateral torso, reducing point pressure on the resident and providing the carer with more surface area for a stable grip. The belt is available in four sizes (S, M, L, XL) to accommodate different torso dimensions; the appropriate size must be confirmed for each resident. The belt is indicated for residents where the carer requires a secure body grip during the transfer manoeuvre - particularly for residents with limited arm function who cannot grip the mover's handles during the transfer, residents with significant trunk instability, or residents who require active carer guidance during the pivoting phase of the transfer from their origin surface onto the mover's rotating seat. The belt must not be used as a lifting aid to raise the resident from the seat; it is a guidance and security belt, not a mechanical lift component.
NCL-HLA046
- Rotating Padded Seats for Transfer Access Without Standing - the Olympic Patient Mover's rotating padded seats allow the resident to transfer from a chair, bed, or wheelchair onto the mover by pivoting onto the seat rather than needing to stand fully; the seat rotates to face the origin surface for transfer-on and then rotates to the travel position for transport; this seated transfer approach reduces the weight-bearing demand on the resident during transfer compared to full standing transfer aids, making the mover appropriate for a wider range of residents including some who cannot weight-bear sufficiently for a standing transfer.
- Eye-Level Contact for Dignity and Communication - a distinctive clinical and dignity benefit of the Olympic Patient Mover over a wheelchair is that the resident is positioned at a higher, more forward-facing seated position that allows them to make eye contact with carers and other people at a similar level; a standard wheelchair positions the resident lower and further back in the room, which can create a communication and social participation barrier; the Patient Mover's higher, more upright seating position supports the resident's sense of participation and human connection during transport, directly addressing CQC Regulation 10 requirements for dignity and respect in care.
- Total-Lock Castors and Manual Leg Spreader for Stable Manoeuvring - the total-lock castors provide a full wheel and swivel lock that prevents the mover from moving in any direction during transfers and during the resident's seated use of the device; the manual leg spreader adjusts the base width for furniture access and narrows for transport through doorways; the turning radius of 1125mm accommodates manoeuvring in care home corridors and room layouts without requiring significant floor space for repositioning.
- 185kg SWL - Mackworth Belt Compatible - PUWER 1998 - NCL-HLA046 - SWL 185kg (29 stone); compatible with Mackworth Back Support Belt in S, M, L, XL sizes; length 1500mm, width 650mm, external width with legs open 1060mm; PUWER 1998 competency training required; MHOR 1992 risk assessment for each resident; the device is a mobility and transfer aid rather than a hoist and is not subject to LOLER 1998; product code NCL-HLA046.