Net Covers - For Bed Rails (134 cm - Closed Ends)
- Tea-Cosy Fit for Telescopic Rails - the net cover fits over the bed rail in a tea-cosy style, with a closed bottom edge that creates a barrier beneath the rail; the closed-end design is specifically suited to profiling beds with telescopic side rails, where the rail mechanism requires a cover that fits over the rail profile rather than attaching to the rail face; the tea-cosy fitting method secures the cover without adhesives, hooks, or screws.
- Three-Rail Model, Closed Ends - the 3-rail model accommodates profiling bed rails with three rail sections, fitting over the complete rail profile; closed ends close the lateral gaps at the rail end positions, reducing entrapment risk at the bumper ends; closed ends are particularly important for telescopic rails where the rail end profile may present a specific entrapment geometry.
- Breathable Tough Net Material - the tough, breathable net construction maintains carer visibility of the resident through the cover, supports airflow, and reduces the risk of limb entrapment between rail sections; the net material provides a barrier against limb entry into the rail gaps without blocking observation or creating a heat-trapping surface against the resident's skin.
- Net Cover Range - the 134cm closed-end 3-rail version (NCL-NET); extended-length 183cm closed-end 3-rail version (NCL-NETL); open-end flat-topped rail model (NCL-NETPB, 200cm); closed ends for telescopic rails, open ends for flat-topped rail designs; a documented bed rail risk assessment confirming the rail type and gap entrapment risk is required.
Net Cover for Bed Rails - 134cm - Three-Rail Model - Telescopic Rails
The Net Rail Cover (134cm, 3-Rail, Closed Ends) is designed for profiling beds with telescopic side rails, fitting in a tea-cosy style over the three-rail profile with closed ends for lateral entrapment prevention. Breathable tough net maintains carer visibility and airflow. Also available in 183cm closed ends (NCL-NETL) and 200cm open ends for flat-topped rails (NCL-NETPB).
Specifications
| Specification | Detail |
|---|---|
| Reference | NCL-NET |
| Length | 134 cm |
| Rail Model | 3-rail; for telescopic side rails |
| Ends | Closed |
| Material | Breathable tough net |
| Fitting Method | Tea-cosy style over the rail |
| Extended Length | NCL-NETL (183cm, closed ends) |
| Flat-Top Version | NCL-NETPB (200cm, open ends) |
Regulatory Compliance
MHRA guidance on bed rail safety identifies gaps in the rail structure as entrapment zones; the net cover directly addresses these gaps in telescopic rail configurations by creating a net barrier over the rail sections. CQC Regulation 12 (safe care) documentation should confirm the rail type (telescopic), the gap entrapment risk identified in the bed rail risk assessment, and the net cover specification rationale. The tea-cosy fitting method should be confirmed as providing adequate coverage of the telescopic rail profile for the specific rail model in use. Mental Capacity Act 2005 best interest obligations apply.
Frequently Asked Questions
What is a telescopic bed rail and why does it need a different cover design?
Telescopic bed rails consist of sections that slide within each other to adjust the rail length for different bed configurations; when extended or partially retracted, the telescoping mechanism creates gaps between rail sections where limbs can become entrapped. Standard side bumpers designed for fixed wooden or metal rails fit against the rail face but do not conform to the telescoping rail profile or cover the internal gaps created by the telescoping mechanism. The net rail cover's tea-cosy fitting method, which fits over the entire rail profile rather than attaching to the face, is designed to accommodate the variable geometry of telescopic rails and cover the mechanism gaps.
What does the 3-rail model specification indicate?
The 3-rail model specification refers to the net cover's design to accommodate telescopic rails with three rail sections - a top rail, middle rail, and lower rail - in the telescoping configuration. The net cover is sized and shaped to fit over this specific three-section rail profile in the tea-cosy style. The open-end version (NCL-NETPB, 200cm) is designed for flat-topped rails rather than the three-section telescoping profile. When specifying, confirm whether the profiling bed in use has a telescopic rail (requiring NCL-NET or NCL-NETL with the closed-end tea-cosy design) or a flat-topped rail (requiring NCL-NETPB).
NCL-NET
Viewed products
- Tea-Cosy Fit for Telescopic Rails - the net cover fits over the bed rail in a tea-cosy style, with a closed bottom edge that creates a barrier beneath the rail; the closed-end design is specifically suited to profiling beds with telescopic side rails, where the rail mechanism requires a cover that fits over the rail profile rather than attaching to the rail face; the tea-cosy fitting method secures the cover without adhesives, hooks, or screws.
- Three-Rail Model, Closed Ends - the 3-rail model accommodates profiling bed rails with three rail sections, fitting over the complete rail profile; closed ends close the lateral gaps at the rail end positions, reducing entrapment risk at the bumper ends; closed ends are particularly important for telescopic rails where the rail end profile may present a specific entrapment geometry.
- Breathable Tough Net Material - the tough, breathable net construction maintains carer visibility of the resident through the cover, supports airflow, and reduces the risk of limb entrapment between rail sections; the net material provides a barrier against limb entry into the rail gaps without blocking observation or creating a heat-trapping surface against the resident's skin.
- Net Cover Range - the 134cm closed-end 3-rail version (NCL-NET); extended-length 183cm closed-end 3-rail version (NCL-NETL); open-end flat-topped rail model (NCL-NETPB, 200cm); closed ends for telescopic rails, open ends for flat-topped rail designs; a documented bed rail risk assessment confirming the rail type and gap entrapment risk is required.