Full Bed Length Bumpers 200 x 76 cm (Standard Profiling Bed Bumper)
- Full 200x76cm Standard Profiling Bed Bumper - full 200cm length and 76cm standard height provides complete inner bed rail coverage for standard profiling beds without mattress overlays; padded construction reduces impact injury risk at the rail surface and minimises direct skin contact with hard bed rail edges during sleep and repositioning episodes.
- Wipe-Clean for NHS IPC - wipe-clean cover allows NHS IPC decontamination between patient uses with an approved surface disinfectant wipe; suitable for care home and hospital profiling bed environments where routine hygiene maintenance between uses is a documented infection control requirement under CQC Regulation 12 (safe care) equipment standards.
- Reduces Impact and Entrapment Risk - the padded full-length design addresses the two primary bed rail safety risks identified in MHRA guidance - impact injury from contact with hard rail surfaces and entrapment of limbs between the rail and the padded cover; full-length coverage prevents gaps where unprotected rail sections could present impact or entrapment hazards.
- Range Options - the standard 200x76cm version (NCL-CSBPB) is appropriate for beds without mattress overlays; the high-sided 200x96cm version (NCL-CSBPBH) is specified for beds with mattress overlays or raised rail configurations; the 200x105cm version (NCL-CSBPBX) covers three wooden side rails; a bed rail risk assessment determines the appropriate height for the individual configuration.
Full Bed Length Bumper - 200x76cm - Standard Profiling Bed
The Full Bed Length Bumper (200x76cm, Standard) provides complete padded inner rail coverage for standard profiling beds without mattress overlays. Wipe-clean cover for NHS IPC decontamination; full-length padded protection reduces impact injury and entrapment risk per MHRA bed rail safety guidance. The high-sided 200x96cm version is NCL-CSBPBH (for beds with mattress overlays or raised rails); the three-rail 200x105cm version is NCL-CSBPBX.
Specifications
| Specification | Detail |
|---|---|
| Reference | NCL-CSBPB |
| Dimensions | 200 x 76 cm (79" x 30") |
| Cover | Wipe-clean |
| Settings | Standard profiling beds - no mattress overlay |
| High-Sided Version | NCL-CSBPBH (200 x 96 cm) |
| Three-Rail Version | NCL-CSBPBX (200 x 105 cm) |
Regulatory Compliance
MHRA guidance on bed rail safety identifies impact injury and limb entrapment as the primary risks requiring management at bed rail surfaces; the full 200x76cm padded cover addresses both risks across the standard profiling bed rail profile. CQC Regulation 12 (safe care) requires that bed safety equipment is appropriate for the individual bed and maintained hygienically; the wipe-clean cover supports NHS IPC-compliant decontamination between uses. A documented bed rail risk assessment is required before fitting, including confirmation that the 76cm standard height is appropriate for the bed configuration in use and that no mattress overlay increases the rail-to-mattress distance beyond the 76cm cover height. Mental Capacity Act 2005 best interest obligations apply where relevant.
Frequently Asked Questions
How does this full-length bumper differ from cotside and two-rail bumpers?
Cotside bumpers (NCL-CSB, NCL-CSFB) use a hook and loop bottom fastening that accommodates a range of rail lengths up to 205cm and are primarily designed for rail coverage with a flexible fit across different rail lengths. Two-rail bumpers (the TRCSB range) feature padded top and bottom rail sections connected by a net window, primarily for profiling beds with visible two-rail profiles. Full bed length bumpers (the CSBPB range) provide a solid padded surface across the full inner bed length at a specified height, without a net window, providing complete coverage of the bed rail and the space between the bed rail and the mattress surface.
What entrapment risk do profiling beds present that this bumper addresses?
MHRA guidance on bed rail safety identifies gaps between the bed rail, the mattress, and the bed frame as entrapment zones where limbs or the head can become trapped during sleep. Profiling bed movement - head and knee elevation - can change the gap dimensions between the mattress and the rail as the bed profile changes. A full-length padded bumper positioned between the resident and the rail surface reduces the accessible gap dimension and cushions any contact with the rail structure, directly reducing both impact and entrapment risk throughout the profiling bed's movement range.
NCL-CSBPB
- Full 200x76cm Standard Profiling Bed Bumper - full 200cm length and 76cm standard height provides complete inner bed rail coverage for standard profiling beds without mattress overlays; padded construction reduces impact injury risk at the rail surface and minimises direct skin contact with hard bed rail edges during sleep and repositioning episodes.
- Wipe-Clean for NHS IPC - wipe-clean cover allows NHS IPC decontamination between patient uses with an approved surface disinfectant wipe; suitable for care home and hospital profiling bed environments where routine hygiene maintenance between uses is a documented infection control requirement under CQC Regulation 12 (safe care) equipment standards.
- Reduces Impact and Entrapment Risk - the padded full-length design addresses the two primary bed rail safety risks identified in MHRA guidance - impact injury from contact with hard rail surfaces and entrapment of limbs between the rail and the padded cover; full-length coverage prevents gaps where unprotected rail sections could present impact or entrapment hazards.
- Range Options - the standard 200x76cm version (NCL-CSBPB) is appropriate for beds without mattress overlays; the high-sided 200x96cm version (NCL-CSBPBH) is specified for beds with mattress overlays or raised rail configurations; the 200x105cm version (NCL-CSBPBX) covers three wooden side rails; a bed rail risk assessment determines the appropriate height for the individual configuration.