Cotside Bumper - F.R. Foam With Wipe-Clean Cover (134 x 76 cm)
- Fire-Retardant Foam Interior - FR foam padding meets the Regulatory Reform (Fire Safety) Order 2005 requirements for soft furnishing materials used in care home and hospital bed environments; the FR foam provides the same protective cushioning as standard foam while meeting the fire safety specification required for resident equipment used in regulated care settings.
- Wipe-Clean Cover for NHS IPC - wipe-clean outer cover allows decontamination between patient uses with an NHS IPC-compliant surface disinfectant wipe; the 134x76cm dimensions provide standard-height rail coverage compatible with a range of bed rail configurations from 133cm to 205cm in length via the hook and loop bottom fastening adjustment.
- Hook and Loop Bottom Fastening - full-length hook and loop fastening along the bottom edge secures the bumper to the bed rail in a firm, adjustable position suitable for rail widths within the 133-205cm range; the bottom fastening design holds the bumper flat against the rail without pinching or creating pressure points at the top edge where the bumper rests against the rail surface.
- 134x76cm Standard Height - 76cm height provides standard rail protection suitable for profiling beds without mattress overlays or raised rail configurations; for use with mattress overlays or when additional height is required, the high-sided 200x96cm version (NCL-CSBPBH) should be considered; vapour-permeable cover version is available as NCL-CSB-PU.
Cotside Bumper - FR Foam - Wipe-Clean Cover - 134x76cm
The Cotside Bumper (134x76cm, Wipe-Clean Cover) provides FR foam padded protection for bed rails with a wipe-clean outer cover for NHS IPC decontamination. Full-length hook and loop bottom fastening accommodates rail lengths from 133cm to 205cm. FR foam meets Regulatory Reform (Fire Safety) Order 2005 requirements. The vapour-permeable cover version is NCL-CSB-PU; the extended-length version is NCL-CSFB (183x76cm).
Specifications
| Specification | Detail |
|---|---|
| Reference | NCL-CSB |
| Dimensions | 134 x 76 cm (53" x 30") |
| Foam | Fire-retardant (FR) |
| Cover | Wipe-clean |
| Fastening | Hook and loop along bottom edge |
| Rail Length Range | 133 - 205 cm |
| Vapour-Permeable Version | NCL-CSB-PU |
| Extended Length Version | NCL-CSFB (183 x 76 cm) |
Regulatory Compliance
The Regulatory Reform (Fire Safety) Order 2005 requires the Responsible Person in a care home to assess and manage fire risk from soft furnishings; FR foam padding meets this requirement for padded bed rail covers used in care home bedrooms. CQC Regulation 12 (safe care) requires that bed safety equipment is appropriate for the individual bed and maintained in a hygienic condition; the wipe-clean cover supports NHS IPC decontamination. MHRA guidance on bed rail safety requires that bumpers fit the full rail length without gaps; the hook and loop fastening accommodates the 133-205cm range, but rail length should be confirmed before specifying to prevent coverage gaps.
Frequently Asked Questions
When should the 134x76cm cotside bumper be used rather than the 183x76cm version?
The 134x76cm version (NCL-CSB) is appropriate where the bed rail length is 134cm or less, or where a shorter bumper is required for a partial-length rail coverage specification. The 183x76cm version (NCL-CSFB) is appropriate for longer rail configurations. For profiling beds with rail lengths up to 205cm, both versions can accommodate the longer rail through the hook and loop fastening adjustment range. Rail length should be measured and confirmed before procurement; the MHRA guidance on bed rail entrapment requires full-length coverage without gaps.
What is the clinical role of FR foam in a bed rail bumper?
The Regulatory Reform (Fire Safety) Order 2005 fire risk assessment for care home bedrooms typically identifies resident bedding, soft furnishings, and bed accessories as fire risk items that must meet FR standards. FR foam padding in bed rail bumpers ensures the product meets the fire safety specification required for use in regulated care environments where fire risk from soft furnishings is a documented concern. FR foam provides the same protective cushioning properties as standard foam; the FR property does not affect the impact protection performance of the bumper but ensures compliance with the fire safety risk management requirements of the care home.
NCL-CSB
- Fire-Retardant Foam Interior - FR foam padding meets the Regulatory Reform (Fire Safety) Order 2005 requirements for soft furnishing materials used in care home and hospital bed environments; the FR foam provides the same protective cushioning as standard foam while meeting the fire safety specification required for resident equipment used in regulated care settings.
- Wipe-Clean Cover for NHS IPC - wipe-clean outer cover allows decontamination between patient uses with an NHS IPC-compliant surface disinfectant wipe; the 134x76cm dimensions provide standard-height rail coverage compatible with a range of bed rail configurations from 133cm to 205cm in length via the hook and loop bottom fastening adjustment.
- Hook and Loop Bottom Fastening - full-length hook and loop fastening along the bottom edge secures the bumper to the bed rail in a firm, adjustable position suitable for rail widths within the 133-205cm range; the bottom fastening design holds the bumper flat against the rail without pinching or creating pressure points at the top edge where the bumper rests against the rail surface.
- 134x76cm Standard Height - 76cm height provides standard rail protection suitable for profiling beds without mattress overlays or raised rail configurations; for use with mattress overlays or when additional height is required, the high-sided 200x96cm version (NCL-CSBPBH) should be considered; vapour-permeable cover version is available as NCL-CSB-PU.