Adjustable Toilet Frame With Raised Toilet Seat.
- Independent Frame Provides Greater Stability Than Pan-Mounted Designs - the Adjustable Toilet Frame stands independently beside the toilet on four floor-contact legs rather than being mounted exclusively on the toilet pan rim; this independent structure means the armrests are supported by the floor-based frame rather than cantilevered from the pan, providing more stable resistance to the lateral forces generated when a resident pushes down on an armrest to rise from the toilet; for residents with significant lower limb weakness who depend heavily on arm pushing force during the rising movement, the floor-supported frame structure is substantially more stable than a pan-mounted bracket system.
- Height and Width Adjustable for Individual User and Environment Fit - the frame height adjusts to match the resident's leg length requirement for the optimal seated position; the frame width adjusts to accommodate different toilet bowl widths and different clearances to adjacent walls, which is important in care home bathrooms where the available space beside the toilet varies considerably between rooms; the width adjustment also allows the frame to be fitted in bathrooms where one side has a wall closer than standard, requiring asymmetric arm placement.
- Contoured Seat with Front and Rear Cut-Outs for Hygiene Access - the removable contoured seat clicks into the frame and incorporates cut-outs at both the front and rear of the seat aperture; the front cut-out allows frontal hygiene access without the resident needing to rise; the rear cut-out provides posterior hygiene access; the removable seat can be taken off the frame for thorough cleaning independently of the frame structure, and replaced when clean.
- 190kg SWL - Flat-Packed - NCL-HMC115 - maximum user weight 190kg (30 stone); supplied flat-packed for easy assembly; suitable for rehabilitation settings and long-term home use; clinical prescription by occupational therapist required to confirm height, width, and armrest configuration; product code NCL-HMC115.
Adjustable Toilet Frame with Raised Seat - 190kg SWL - Height and Width Adjustable - Front and Rear Cut-Outs
The Adjustable Toilet Frame with Raised Toilet Seat provides an independent floor-based support structure around the toilet, with height and width adjustable legs for individual fit, integrated armrests for rising support, and a contoured removable seat with front and rear hygiene cut-outs. SWL 190kg. Supplied flat-packed. Occupational therapist assessment required for correct height and width configuration. NCL-HMC115.
Specifications
| Specification | Detail |
|---|---|
| Maximum User Weight | 190kg (30 stone) |
| Frame Height | Adjustable |
| Frame Width | Adjustable - accommodates different toilet widths and wall clearances |
| Seat | Contoured; removable; front and rear cut-outs |
| Armrests | Integrated - supported by floor-based frame legs |
| Supply | Flat-packed for assembly |
| Reference | NCL-HMC115 |
Regulatory Compliance
The Adjustable Toilet Frame is a medical device. Clinical assessment and prescription by an occupational therapist is required to confirm the appropriate height and width settings for the specific resident and toilet installation. The frame must be confirmed stable at the prescribed height and width before the resident uses it; a frame that rocks or shifts during use must be readjusted. The removable seat must be confirmed as correctly clicked into position before each use. Equipment records must note the product code and the prescribed configuration settings for CQC Regulation 12 compliance.
Frequently Asked Questions
How does the Adjustable Toilet Frame differ from the Adjustable Toilet Seat Aid (ID 298) and when should each be prescribed?
The Adjustable Toilet Seat Aid (ID 298) is a bracket-mounted device that attaches to the toilet pan and provides armrests via a frame attached to the pan; the armrests are effectively cantilevered from the pan-attachment point. The Adjustable Toilet Frame (this product) is an independent free-standing structure that surrounds the toilet and has floor-based legs; the armrests are supported by the floor rather than by the pan. For residents who apply substantial downward and lateral force to the armrests during the rising movement - due to significant lower limb weakness, high body weight approaching the 190kg SWL, or poor trunk balance - the floor-based frame provides greater stability resistance to these forces than the pan-mounted bracket. The toilet frame is also appropriate when the toilet pan's rim profile or condition makes secure bracket attachment unreliable. The pan-mounted seat aid (ID 298) is more appropriate for residents with moderate mobility limitation who require only modest arm support for toilet transitions, and where the toilet pan's rim is suitable for secure bracket attachment; it is also easier to fit and remove for residents who alternate between using and not using toilet aids throughout the day. The occupational therapist's assessment of the resident's rising force, trunk stability, and body weight relative to the available aids determines the appropriate selection.
What does the width adjustment on the toilet frame accommodate and why does it matter clinically?
The width adjustment allows the frame's leg width to be varied so that the frame can straddle the toilet bowl at the appropriate position while the armrests are at the correct distance from the resident's body when they are seated. If the frame is too wide, the armrests are too far from the resident's hips to provide effective pushing support during the rising movement - the resident's elbows would be significantly abducted to reach the armrests, reducing the efficiency of the push-up force. If the frame is too narrow, the armrests would press against the resident's thighs during the seated period, causing discomfort and restricting the sitting position. The width adjustment also addresses the physical installation constraint: care home bathrooms often have a wall, vanity unit, or towel rail close to one side of the toilet, which limits how wide the frame can be on that side; the width adjustment allows the frame to be fitted asymmetrically within the available space without compromising the armrest position on the accessible side. The occupational therapist must measure both the toilet bowl width and the available wall clearance on each side before specifying the frame width setting, and document the prescribed width in the care plan so that the setting is maintained consistently.
NCL-HMC115
- Independent Frame Provides Greater Stability Than Pan-Mounted Designs - the Adjustable Toilet Frame stands independently beside the toilet on four floor-contact legs rather than being mounted exclusively on the toilet pan rim; this independent structure means the armrests are supported by the floor-based frame rather than cantilevered from the pan, providing more stable resistance to the lateral forces generated when a resident pushes down on an armrest to rise from the toilet; for residents with significant lower limb weakness who depend heavily on arm pushing force during the rising movement, the floor-supported frame structure is substantially more stable than a pan-mounted bracket system.
- Height and Width Adjustable for Individual User and Environment Fit - the frame height adjusts to match the resident's leg length requirement for the optimal seated position; the frame width adjusts to accommodate different toilet bowl widths and different clearances to adjacent walls, which is important in care home bathrooms where the available space beside the toilet varies considerably between rooms; the width adjustment also allows the frame to be fitted in bathrooms where one side has a wall closer than standard, requiring asymmetric arm placement.
- Contoured Seat with Front and Rear Cut-Outs for Hygiene Access - the removable contoured seat clicks into the frame and incorporates cut-outs at both the front and rear of the seat aperture; the front cut-out allows frontal hygiene access without the resident needing to rise; the rear cut-out provides posterior hygiene access; the removable seat can be taken off the frame for thorough cleaning independently of the frame structure, and replaced when clean.
- 190kg SWL - Flat-Packed - NCL-HMC115 - maximum user weight 190kg (30 stone); supplied flat-packed for easy assembly; suitable for rehabilitation settings and long-term home use; clinical prescription by occupational therapist required to confirm height, width, and armrest configuration; product code NCL-HMC115.