Two Rail Bumper with Net Window and Net Base (220 cm)
- Split Net Base - Floor-Clear Design - integrated split net base holds the bumper off the floor when the profiling bed side rails are lowered, preventing floor surface contamination of the padded rail cover; eliminates the floor-to-bedside contamination pathway that occurs with standard bumpers during the routine rail-lowering that happens multiple times per day in active care environments.
- 220cm Extended Length - the 220cm length suits the longest profiling bed rail configurations in the CB floor-clear range; specified where rail measurement confirms a length greater than 200cm; the 180cm (NCL-TRCSB18-CB) and 200cm (NCL-TRCSB-CB) versions cover shorter and standard rail lengths respectively within the same floor-clear design family.
- Net Window for Visibility - breathable see-through concertina net window between the top and bottom padded rail covers maintains carer observation of the resident; the concertina net and split net base function together to keep the bumper floor-clear and the net taut when the rail is raised, and both fold appropriately as the rail is lowered for care access.
- Wipe-Clean, Hook and Loop - wipe-clean outer material supports NHS IPC decontamination between uses; hook and loop fastenings allow quick fitting and removal without tools; supplied in pairs; always measure the rail length before procurement to confirm the 220cm specification is correct for the individual bed configuration.
Two Rail Bumper with Net Window and Net Base - 220cm - Floor-Clear Design
The Two Rail Bumper with Net Window and Net Base (220cm) is the extended-length version of the CB floor-clear range for profiling beds with longer side rail configurations. The split net base prevents the bumper from touching the floor when rails are lowered, eliminating the floor-contamination pathway identified in NHS IPC guidance. Wipe-clean outer material; concertina net window; hook and loop fastenings; supplied in pairs. Also available in 180cm (NCL-TRCSB18-CB) and 200cm (NCL-TRCSB-CB).
Specifications
| Specification | Detail |
|---|---|
| Reference | NCL-TRCSB22-CB |
| Length | 220 cm |
| Key Feature | Split net base - floor-clear when rails lowered |
| Net Window | See-through mesh; concertina |
| Outer Material | Wipe-clean |
| Fastening | Hook and loop |
| Supplied | In pairs |
| Other Lengths | NCL-TRCSB18-CB (180cm); NCL-TRCSB-CB (200cm) |
Regulatory Compliance
MHRA guidance on bed rail safety requires that bumpers cover the full length of the rail without gaps; the 220cm specification is appropriate only where rail measurement confirms this length. CQC Regulation 12 (safe care) documentation should record the rail measurement, the rationale for specifying the 220cm length, and the inspection schedule for the floor-clear net base mechanism. NHS IPC compliance is supported by the net base eliminating floor contamination of the bumper surface during routine care, reducing the decontamination burden on care staff and maintaining hygiene standards throughout the daily care cycle. Mental Capacity Act 2005 best interest obligations apply to the decision to use bed rails regardless of the bumper specification.
Frequently Asked Questions
When should the 220cm CB version be specified?
The 220cm CB version (NCL-TRCSB22-CB) should be specified where measurement of the profiling bed side rail confirms a length greater than 200cm. Extended-length profiling beds may be specified for taller residents, or where the care home has procured beds with non-standard longer rail configurations. The 220cm CB version provides the same floor-clear net base functionality as the 200cm and 180cm CB versions, extended to cover the full length of the longer rail without leaving unprotected gaps. Rail length measurement and documentation in the care home equipment register is essential for correct specification at procurement and replacement.
Does the net base mechanism require maintenance or inspection?
Yes. The net base mechanism should be inspected at each use to confirm the split net fans correctly when the rail is lowered and folds back when raised, and that the net material is intact without tears or deformation that would allow the bumper to contact the floor. CQC Regulation 12 (safe care) equipment maintenance obligations require that safety equipment is regularly inspected and any defects documented and acted upon. A bumper with a damaged net base that allows floor contact during rail-lowering should be replaced before the bed is returned to clinical use.
NCL-TRCSB22-CB
- Split Net Base - Floor-Clear Design - integrated split net base holds the bumper off the floor when the profiling bed side rails are lowered, preventing floor surface contamination of the padded rail cover; eliminates the floor-to-bedside contamination pathway that occurs with standard bumpers during the routine rail-lowering that happens multiple times per day in active care environments.
- 220cm Extended Length - the 220cm length suits the longest profiling bed rail configurations in the CB floor-clear range; specified where rail measurement confirms a length greater than 200cm; the 180cm (NCL-TRCSB18-CB) and 200cm (NCL-TRCSB-CB) versions cover shorter and standard rail lengths respectively within the same floor-clear design family.
- Net Window for Visibility - breathable see-through concertina net window between the top and bottom padded rail covers maintains carer observation of the resident; the concertina net and split net base function together to keep the bumper floor-clear and the net taut when the rail is raised, and both fold appropriately as the rail is lowered for care access.
- Wipe-Clean, Hook and Loop - wipe-clean outer material supports NHS IPC decontamination between uses; hook and loop fastenings allow quick fitting and removal without tools; supplied in pairs; always measure the rail length before procurement to confirm the 220cm specification is correct for the individual bed configuration.