Two Rail Bumper Machine Washable (200 cm)
- Machine Washable for NHS IPC - fully machine washable quilted construction enables thorough laundering per HTM 01-04 care home linen management standards; the 200cm standard length is the most common specification for adult care home profiling beds, making this the default washable bumper choice for settings where machine laundering is the required NHS IPC decontamination method.
- Quilted Padding for Impact Protection - soft quilted padding on the top and bottom rail bumpers cushions impact at the rail surface during sleep and movement; the quilted construction distributes load across the padded area, reducing injury risk for residents who contact the rail during repositioning or restless periods, consistent with MHRA bed rail safety guidance on impact injury prevention.
- See-Through Concertina Net - strong see-through net window provides carer observation access without bumper removal; concertina design folds neatly as profiling bed rails are lowered for care access, maintaining the bumper in position and eliminating the repeated removal and refitting burden that would significantly reduce clinical compliance with bumper use.
- 200cm Standard Length - 200cm standard profiling bed length; also available in 180cm (NCL-TRCSBW18) and 220cm (NCL-TRCSBW22) for beds with shorter or longer rail configurations; all versions are supplied in pairs with hook and loop fastenings; the wipe-clean version for the same 200cm length is NCL-TRCSB-BLU.
Two Rail Bumper Machine Washable - 200cm - Net Window - Profiling Beds
The Machine Washable Two Rail Bumper (200cm) is the standard-length washable bumper for adult care home profiling beds, providing quilted padded protection for top and bottom rails connected by a concertina see-through net. Fully machine washable per HTM 01-04. Hook and loop fastenings; supplied in pairs. Available in 180cm (NCL-TRCSBW18) and 220cm (NCL-TRCSBW22); the wipe-clean version is NCL-TRCSB-BLU.
Specifications
| Specification | Detail |
|---|---|
| Reference | NCL-TRCSBW |
| Length | 200 cm |
| Construction | Machine washable quilted padding |
| Net Window | See-through mesh; concertina design |
| Fastening | Hook and loop |
| Supplied | In pairs |
| Other Lengths | NCL-TRCSBW18 (180cm); NCL-TRCSBW22 (220cm) |
| Wipe-Clean Version | NCL-TRCSB-BLU (200cm) |
Regulatory Compliance
MHRA guidance on bed rail safety identifies impact injury at rail surfaces as a primary risk for residents with limited mobility or bed position awareness. The quilted bumpers directly mitigate this risk. CQC Regulation 12 (safe care) requires that bed safety equipment is maintained in a hygienic condition; machine washability enables HTM 01-04-compliant laundering for full decontamination. A documented bed rail risk assessment is required before fitting, and the Mental Capacity Act 2005 best interest obligations must be addressed where the resident lacks capacity to consent to bed rail use. The 200cm standard length suits the majority of adult care home profiling bed configurations; measure rail length before procurement to confirm suitability.
Frequently Asked Questions
When should the 200cm washable bumper be chosen over the wipe-clean version?
The machine washable version (NCL-TRCSBW) should be specified where the care setting's NHS IPC infection control policy requires launderable bed safety equipment, or where high-level decontamination following infection events or body fluid contamination is a requirement. The wipe-clean version (NCL-TRCSB-BLU) is appropriate for routine between-use decontamination where machine laundering is not the required method. Both versions are 200cm and provide the same quilted padding and concertina net specification; the choice is determined by the care home infection control policy and the decontamination method required.
How are these bumpers fitted to a profiling bed?
The hook and loop fastenings attach to the bed side rail, with the padded top bumper positioned at the upper rail and the padded bottom bumper at the lower rail, connected by the concertina net panel between them. The bumper should be centred along the full 200cm rail length to provide continuous protection without gaps. Fitting should be checked after the first few uses to confirm the fastenings remain secure through the profiling bed's movement cycle. The concertina net should be confirmed to fold and extend correctly as the rail is lowered and raised before the bed is returned to clinical use.
NCL-TRCSBW
- Machine Washable for NHS IPC - fully machine washable quilted construction enables thorough laundering per HTM 01-04 care home linen management standards; the 200cm standard length is the most common specification for adult care home profiling beds, making this the default washable bumper choice for settings where machine laundering is the required NHS IPC decontamination method.
- Quilted Padding for Impact Protection - soft quilted padding on the top and bottom rail bumpers cushions impact at the rail surface during sleep and movement; the quilted construction distributes load across the padded area, reducing injury risk for residents who contact the rail during repositioning or restless periods, consistent with MHRA bed rail safety guidance on impact injury prevention.
- See-Through Concertina Net - strong see-through net window provides carer observation access without bumper removal; concertina design folds neatly as profiling bed rails are lowered for care access, maintaining the bumper in position and eliminating the repeated removal and refitting burden that would significantly reduce clinical compliance with bumper use.
- 200cm Standard Length - 200cm standard profiling bed length; also available in 180cm (NCL-TRCSBW18) and 220cm (NCL-TRCSBW22) for beds with shorter or longer rail configurations; all versions are supplied in pairs with hook and loop fastenings; the wipe-clean version for the same 200cm length is NCL-TRCSB-BLU.