Turn Easy Sheets - Fitted & Draw Sheet Sets for Effortless Patient Repositioning.
- Complete Low-Friction Bed System - each Turn Easy set combines a fitted sheet with a central satin panel and a coordinating draw sheet in a single procurement item, providing the full satin-on-satin low-friction interface without requiring separate sourcing of fitted and draw sheet components; the matched set simplifies procurement, stock management, and laundering logistics in care home and hospital linen management systems where consistency of bed linen specification across the facility is a clinical and operational priority.
- 2-Way and 4-Way Set Options - the NCL-FSC2 set pairs the single fitted sheet with a 2-way draw sheet for repositioning tasks limited to up-and-down movement; the NCL-FSC4 set pairs the single fitted sheet with a 4-way draw sheet for full turning and lateral repositioning protocols; the correct set is selected based on the resident's repositioning assessment, which should specify the directions of movement required and the number of carers involved in each repositioning episode.
- Bariatric Option for 4ft Beds - the NCL-FSC4B bariatric set provides the same complete fitted-and-draw-sheet system for wider 4ft beds, accommodating bariatric residents who require a wider bed configuration for safe care; the bariatric set uses the 4-way draw sheet to support lateral repositioning, which is a higher-risk manoeuvre in bariatric care and where friction reduction provides the greatest mechanical benefit for carer safety under MHOR 1992 risk assessment requirements.
- Machine Washable at High Temperatures - all components of the Turn Easy sets are machine washable at high temperatures for institutional laundry compliance; the satin panel maintains its low-friction performance across repeated hot-wash cycles; the sets should be laundered after each resident use in line with NHS IPC guidance and returned to service only after confirming that the satin panel and fitted sheet outer fabric remain intact and functional after the wash cycle.
Turn Easy Fitted and Draw Sheet Sets - Complete Low-Friction Repositioning System
The Turn Easy fitted and draw sheet sets provide a complete matched low-friction bed system in a single procurement item, combining the fitted sheet satin panel base with a coordinating 2-way or 4-way draw sheet. The satin-on-satin interface across both components minimises friction and shear during turning and repositioning, supporting MHOR 1992 manual handling reduction and NICE CG179 tissue viability obligations. Available in standard single and bariatric 4ft configurations. All components are hot washable and UK manufactured.
Specifications
| Specification | Detail |
|---|---|
| NCL-FSC2 | Single fitted sheet (200x90cm / Satin 150x70cm) + 2-way draw sheet (200x145cm) |
| NCL-FSC4 | Single fitted sheet (200x90cm / Satin 150x70cm) + 4-way draw sheet (200x145cm) |
| NCL-FSC4B | Bariatric fitted sheet + 4-way draw sheet (for 4ft bed) |
| Satin Panel Interface | Low-friction satin-on-satin when draw sheet is laid over fitted sheet |
| Wash Compatibility | Machine washable at high temperatures |
| Origin | Manufactured in the UK |
Regulatory Compliance
The Turn Easy sets support MHOR 1992 compliance by providing a matched low-friction system that reduces the manual handling load on carers during repositioning without requiring lifting. The combined fitted and draw sheet system addresses both the bed surface friction (fitted sheet satin panel) and the carer handling method (draw sheet edge grip), giving the most complete friction reduction achievable within a standard bedding system. NICE CG179 tissue viability requirements are supported by the shear force reduction at the skin interface. NHS IPC hot-wash compliance is confirmed for all components. The bariatric NCL-FSC4B set specifically addresses the elevated manual handling risk in bariatric repositioning tasks identified in MHOR 1992 risk assessments.
Frequently Asked Questions
Which set should be selected for a resident on a standard turning protocol, and how is the 2-way vs 4-way decision made?
The decision between the NCL-FSC2 and NCL-FSC4 set should be made based on the resident's repositioning assessment documented in the care plan. If the protocol requires the resident to be repositioned from supine to a lateral position at regular intervals - typically every two hours for high-risk residents per NICE CG179 - then lateral turning is required and the NCL-FSC4 with its 4-way draw sheet is the correct selection, as the 4-way glide supports movement across all axes including the transverse turning direction. If the repositioning need is limited to keeping the resident centred on the mattress and preventing them from slipping down toward the foot of the bed, the NCL-FSC2 with its 2-way draw sheet is sufficient. Where the repositioning protocol includes both lateral turns and up-bed moves, the 4-way set covers both requirements.
Is the bariatric NCL-FSC4B set the same as the standard set in a larger size, or are there other differences?
The NCL-FSC4B is specifically designed for 4ft bariatric beds and uses the 4-way draw sheet only, as the lateral repositioning requirement is universal in bariatric care - repositioning a bariatric resident from supine to lateral is the standard turning protocol, and a 2-way draw sheet alone would not support this manoeuvre. The fitted sheet in the bariatric set is sized to fit the 4ft (approximately 120cm) bed width and is constructed to the same satin panel specification as the standard fitted sheets to provide the same low-friction surface across the wider bed. Carers using the bariatric set should be assessed for the specific repositioning technique and number of staff required for each turning episode under the MHOR 1992 risk assessment for that individual resident, as the higher mass in bariatric repositioning increases the musculoskeletal risk per manoeuvre even with low-friction linen in place.
NCL-FSC2
- Complete Low-Friction Bed System - each Turn Easy set combines a fitted sheet with a central satin panel and a coordinating draw sheet in a single procurement item, providing the full satin-on-satin low-friction interface without requiring separate sourcing of fitted and draw sheet components; the matched set simplifies procurement, stock management, and laundering logistics in care home and hospital linen management systems where consistency of bed linen specification across the facility is a clinical and operational priority.
- 2-Way and 4-Way Set Options - the NCL-FSC2 set pairs the single fitted sheet with a 2-way draw sheet for repositioning tasks limited to up-and-down movement; the NCL-FSC4 set pairs the single fitted sheet with a 4-way draw sheet for full turning and lateral repositioning protocols; the correct set is selected based on the resident's repositioning assessment, which should specify the directions of movement required and the number of carers involved in each repositioning episode.
- Bariatric Option for 4ft Beds - the NCL-FSC4B bariatric set provides the same complete fitted-and-draw-sheet system for wider 4ft beds, accommodating bariatric residents who require a wider bed configuration for safe care; the bariatric set uses the 4-way draw sheet to support lateral repositioning, which is a higher-risk manoeuvre in bariatric care and where friction reduction provides the greatest mechanical benefit for carer safety under MHOR 1992 risk assessment requirements.
- Machine Washable at High Temperatures - all components of the Turn Easy sets are machine washable at high temperatures for institutional laundry compliance; the satin panel maintains its low-friction performance across repeated hot-wash cycles; the sets should be laundered after each resident use in line with NHS IPC guidance and returned to service only after confirming that the satin panel and fitted sheet outer fabric remain intact and functional after the wash cycle.