Machine-Washable Bed Bumpers - Quilted Protection (183 x 76 cm Open Ends)
- 183cm Extended Length - the 183x76cm machine-washable quilted bumper provides extended padded coverage area along the rail for longer rail configurations or where the resident's movement during sleep requires greater padded surface coverage than the 134cm version (NCL-MWB) provides; both versions use the same hook and loop bottom fastening and standard 76cm height for non-overlay profiling beds.
- Machine-Washable FR Polyester - fire-retardant polyester with quilted construction provides impact cushioning while meeting the Regulatory Reform (Fire Safety) Order 2005 fire safety requirements; fully machine washable per HTM 01-04 for thorough laundering decontamination, making this version the appropriate specification for care settings where machine washing of bed safety equipment is the required NHS IPC decontamination method.
- Hook and Loop Bottom Fastening - Open Ends - hook and loop fastening along the bottom edge for secure positioning; open ends provide ventilation and flexibility at the rail end points; standard 76cm height for profiling beds without overlays; the extended-length 200x76cm version is NCL-MWBPB for full profiling bed length standard-height coverage.
- NHS IPC and CQC Regulation 12 - machine-washable specification supports HTM 01-04-compliant laundering decontamination; CQC Regulation 12 (safe care) equipment hygiene obligations met; a documented bed rail risk assessment confirming the clinical indication and the 183cm length requirement is required before fitting; Mental Capacity Act 2005 best interest obligations apply where applicable.
Machine-Washable Quilted Bed Bumper - 183x76cm - Open Ends - Extended Length
The Machine-Washable Quilted Bed Bumper (183x76cm, Open Ends) provides extended-length FR polyester quilted padded coverage for profiling beds requiring greater rail coverage area than the 134cm version. Hook and loop bottom fastening; standard 76cm height for non-overlay beds; machine washable per HTM 01-04. Full-length 200x76cm version is NCL-MWBPB; standard 134x76cm version is NCL-MWB.
Specifications
| Specification | Detail |
|---|---|
| Reference | NCL-MWBL |
| Dimensions | 183 x 76 cm (72" x 30") |
| Material | Fire-retardant polyester, quilted |
| Ends | Open |
| Fastening | Hook and loop along bottom edge |
| Washing | Machine washable |
| Standard Length Version | NCL-MWB (134 x 76 cm) |
| Full Length Version | NCL-MWBPB (200 x 76 cm) |
Regulatory Compliance
The same Regulatory Reform (Fire Safety) Order 2005 FR material requirement, NHS IPC machine-washable HTM 01-04 decontamination standard, MHRA bed rail safety guidance, CQC Regulation 12 equipment documentation obligations, and Mental Capacity Act 2005 best interest requirements that apply to the 134x76cm version (NCL-MWB) apply equally to the 183x76cm version. The 183cm body length is selected based on the rail coverage area requirement confirmed in the bed rail risk assessment; it does not change the regulatory compliance framework applicable to the product.
Frequently Asked Questions
When should the 183cm version be chosen over the 134cm or 200cm versions?
The 183cm version (NCL-MWBL) should be specified where the clinical assessment indicates that 134cm of padded body coverage is insufficient for the resident's movement patterns, but a full 200cm body length is not required or would be oversized for the rail configuration. Where the rail length is between 134cm and 183cm, or where the resident's movement consistently reaches the 134cm bumper end but not the full 200cm extent, the 183cm version provides appropriate coverage. Both the 183cm and 200cm versions use the same 76cm standard height, open-end design, and hook and loop fastening; the selection is based solely on the required padded coverage area.
How does the quilted construction maintain its cushioning through repeated machine-washing?
The quilted construction of the MWB range uses stitched layers of FR polyester that maintain their structural integrity through repeated machine-washing cycles; the quilting stitches hold the layers in their distributed pattern, preventing the padding from migrating or clumping in the way that loose-fill padding materials can when repeatedly laundered. The care home laundry schedule should confirm that the wash temperature does not exceed the manufacturer's care label specification for the FR polyester material, as excessively high temperatures may affect the polyester fibre structure over time. Inspect the bumper after each laundering for any stitching damage or deformation that could affect the protective function.
NCL-MWBL
- 183cm Extended Length - the 183x76cm machine-washable quilted bumper provides extended padded coverage area along the rail for longer rail configurations or where the resident's movement during sleep requires greater padded surface coverage than the 134cm version (NCL-MWB) provides; both versions use the same hook and loop bottom fastening and standard 76cm height for non-overlay profiling beds.
- Machine-Washable FR Polyester - fire-retardant polyester with quilted construction provides impact cushioning while meeting the Regulatory Reform (Fire Safety) Order 2005 fire safety requirements; fully machine washable per HTM 01-04 for thorough laundering decontamination, making this version the appropriate specification for care settings where machine washing of bed safety equipment is the required NHS IPC decontamination method.
- Hook and Loop Bottom Fastening - Open Ends - hook and loop fastening along the bottom edge for secure positioning; open ends provide ventilation and flexibility at the rail end points; standard 76cm height for profiling beds without overlays; the extended-length 200x76cm version is NCL-MWBPB for full profiling bed length standard-height coverage.
- NHS IPC and CQC Regulation 12 - machine-washable specification supports HTM 01-04-compliant laundering decontamination; CQC Regulation 12 (safe care) equipment hygiene obligations met; a documented bed rail risk assessment confirming the clinical indication and the 183cm length requirement is required before fitting; Mental Capacity Act 2005 best interest obligations apply where applicable.