Deep Pile Polyester Bumpers (200 x 96 cm)
- Full-Length High-Sided - Premium CSHP Specification - the 200x96cm version is the highest specification in the CSHP air-permeable range, providing full profiling bed length coverage at 96cm high-sided height for seizure-prone patients on overlay mattress beds; this is the appropriate specification where full-length seizure-safe coverage and overlay mattress height coverage are both required simultaneously.
- Air-Permeable Fleece Full Length - deep-pile polyester fleece allows airflow through the bumper surface at the face contact point during seizure episodes across the full 200cm profiling bed rail length; for patients with uncontrolled or high-frequency tonic-clonic seizures on overlay mattress beds, this version provides the complete CSHP safety specification in a single bumper.
- Full-Length Hook and Loop - Machine Washable - full-length hook and loop fastening along the bottom edge provides secure attachment to the rail across the full 200cm; machine washable for HTM 01-04-compliant laundering; high-dependency care environments with both seizure management and strict infection control protocols can specify this version to meet both requirements.
- CSHP Range Completion - the 200x96cm is the sixth and final option in the CSHP range; the standard-height 200cm version is NCL-CSHP3; all specifications in the range share the air-permeable deep-pile polyester fleece material, full-length hook and loop fastening, and machine-washable construction; the seizure and bed rail risk assessments together drive the final size selection.
Deep Pile Polyester Bumper - 200x96cm - High-Sided - Air-Permeable
The Deep Pile Polyester Bumper (200x96cm) is the highest specification in the CSHP air-permeable fleece range, providing full profiling bed length coverage at 96cm high-sided height for seizure-prone patients on overlay mattress profiling beds. Full-length hook and loop fastening; machine washable. Standard-height 200cm version is NCL-CSHP3; the complete range spans six size options across three lengths and two heights.
Specifications
| Specification | Detail |
|---|---|
| Reference | NCL-CSHP3H |
| Dimensions | 200 x 96 cm (79" x 38") |
| Material | Deep-pile polyester fleece |
| Key Property | Air-permeable |
| Fastening | Full-length hook and loop |
| Washing | Machine washable |
| Standard-Height Version | NCL-CSHP3 (200 x 76 cm) |
| Full Range | NCL-CSHP1, CSHP1H, CSHP18, CSHP18H, CSHP3, CSHP3H |
Regulatory Compliance
All compliance requirements applicable across the CSHP range - NICE CG137/NG217 seizure safety, MHRA bed rail safety, HTM 01-04 machine-washable decontamination, CQC Regulation 12 documentation, and Mental Capacity Act 2005 best interest obligations - apply to this highest-specification version. Both the full-length 200cm coverage and the 96cm height must each be confirmed as clinically indicated in the seizure and bed rail risk assessments before specifying; the maximum specification should not be defaulted to without clinical justification.
Frequently Asked Questions
When is the full-length high-sided 200x96cm the appropriate CSHP specification?
The 200x96cm version (NCL-CSHP3H) is appropriate where the seizure risk assessment confirms that full-length rail coverage is required (seizure movement extends along the entire rail), and the bed configuration includes a mattress overlay requiring the 96cm height to cover exposed rail above the overlay surface. Where either condition is absent - where shorter coverage is adequate, or where no overlay is in use - a lower specification from the range is more appropriate. The 200x96cm version is the most complex to remove and refit for laundering; this handling consideration should be factored into the care plan for patients requiring frequent bedding changes.
How does the CSHP range relate to other air-permeable or breathable bed safety products?
The CSHP deep-pile polyester fleece range is specifically designed for air-permeability at the face contact point during seizure episodes, a clinical requirement not shared by most standard cotside bumper ranges. The earlier net cover ranges (NCL-NET, NCL-NETL, NCL-NETPB) use a breathable mesh that is permeable to air and visible through, but these net covers address entrapment prevention rather than providing impact cushioning. The CSHP range provides both cushioned impact protection and air permeability in a single product specifically indicated for the seizure care setting.
NCL-CSHP3H
Viewed products
- Full-Length High-Sided - Premium CSHP Specification - the 200x96cm version is the highest specification in the CSHP air-permeable range, providing full profiling bed length coverage at 96cm high-sided height for seizure-prone patients on overlay mattress beds; this is the appropriate specification where full-length seizure-safe coverage and overlay mattress height coverage are both required simultaneously.
- Air-Permeable Fleece Full Length - deep-pile polyester fleece allows airflow through the bumper surface at the face contact point during seizure episodes across the full 200cm profiling bed rail length; for patients with uncontrolled or high-frequency tonic-clonic seizures on overlay mattress beds, this version provides the complete CSHP safety specification in a single bumper.
- Full-Length Hook and Loop - Machine Washable - full-length hook and loop fastening along the bottom edge provides secure attachment to the rail across the full 200cm; machine washable for HTM 01-04-compliant laundering; high-dependency care environments with both seizure management and strict infection control protocols can specify this version to meet both requirements.
- CSHP Range Completion - the 200x96cm is the sixth and final option in the CSHP range; the standard-height 200cm version is NCL-CSHP3; all specifications in the range share the air-permeable deep-pile polyester fleece material, full-length hook and loop fastening, and machine-washable construction; the seizure and bed rail risk assessments together drive the final size selection.