Manual Flow Regulator & Connector - Precise Suction Flow Control for 3A Aspirators
- Precision manual flow regulator for the 3A Professional Aspirator range, providing adjustable suction flow control for clinical procedures requiring variable vacuum strength across different patient needs and clinical applications.
- Direct connector integration with 3A aspirator units, fitting the 3A Professional Aspirator range without adaptors or modification, maintaining a sealed suction pathway during clinical use.
- Manual adjustment dial for real-time flow rate control, allowing the clinician to increase or decrease suction intensity during a procedure without interrupting the suction pathway or disconnecting the patient tubing.
- UKCA compliant medical device accessory, designed for use with Class IIa suction equipment in accordance with CQC Regulation 12 requirements for maintained and appropriate clinical device accessories.
Manual Flow Regulator and Connector: Precise Suction Control for 3A Aspirator Range
The Manual Flow Regulator and Connector is a precision accessory for the 3A Professional Aspirator range, providing adjustable suction flow control during clinical procedures.
The manual adjustment dial allows real-time flow rate modification without interrupting the suction pathway. The connector integrates directly with 3A aspirator units without adaptors. The regulator supports clinical applications requiring variable vacuum strength, including oral suctioning, wound drainage, and airway management.
Product Specifications
| Specification | Detail |
|---|---|
| Product Code | NCL-3A560 |
| Type | Manual flow regulator with connector |
| Compatibility | 3A Professional Aspirator range |
| Adjustment | Manual dial for real-time flow control |
| Classification | Medical device accessory (UKCA) |
| Application | Clinical suction procedures |
Clinical and Regulatory Compliance
Flow regulators used with clinical suction devices must be compatible with the host aspirator and maintain a sealed suction pathway. CQC Regulation 12 requires that medical device accessories are appropriate, maintained, and used in accordance with manufacturer instructions. The regulator should be cleaned and inspected after each use and replaced if the seal or adjustment mechanism shows signs of wear.
Frequently Asked Questions
Is this regulator compatible with other aspirator brands?
This regulator is designed specifically for the 3A Professional Aspirator range. Compatibility with other aspirator brands or models is not guaranteed. Using an incompatible regulator may result in suction leaks, incorrect flow rates, or connector failure during clinical use. Confirm compatibility before use.
How should the regulator be cleaned?
Disconnect from the aspirator after each use. Clean the exterior and connector with a compatible clinical disinfectant. Check the adjustment dial for smooth operation and the connector seal for integrity. Replace the regulator if the seal is damaged or the dial mechanism becomes stiff or inconsistent.
NCL-3A560
Viewed products
4 other products in the same category:
- Precision manual flow regulator for the 3A Professional Aspirator range, providing adjustable suction flow control for clinical procedures requiring variable vacuum strength across different patient needs and clinical applications.
- Direct connector integration with 3A aspirator units, fitting the 3A Professional Aspirator range without adaptors or modification, maintaining a sealed suction pathway during clinical use.
- Manual adjustment dial for real-time flow rate control, allowing the clinician to increase or decrease suction intensity during a procedure without interrupting the suction pathway or disconnecting the patient tubing.
- UKCA compliant medical device accessory, designed for use with Class IIa suction equipment in accordance with CQC Regulation 12 requirements for maintained and appropriate clinical device accessories.