QuickMove 170 - adjustable patient mover for safer sit-to-stand transfers with active user engagement.
- Adjustable Height and Width for Individual Fit - the QuickMove 170 provides height and width adjustment of the lower leg support, accommodating different leg lengths and widths between residents without requiring a separate product for each size; the height adjustment ensures the knee pad is at the correct position relative to the resident's knee for effective support during the standing phase, and the width adjustment allows the leg support to accommodate different inter-knee distances; this adjustability makes the QuickMove appropriate for both standard and bariatric leg profiles within its 170kg SWL.
- Angled Seat Cushions for Buttock Support During Transfer - the angled seat cushions support the resident's buttocks during the movement phase between sitting and standing, providing a surface that the resident can press against to assist the sitting-to-rising movement without fully bearing their weight on their legs at the initiation of the transfer; the cushions can be opened (folded aside) to allow access from a wheelchair or toilet where the folded position is needed for the device to approach the resident without the cushions obstructing entry from the side.
- Compact Lightweight Frame for Tight Care Environments - at 980mm length and 605mm width, the QuickMove 170 is smaller than the Olympic Turner and is specifically designed to be compact and manoeuvrable in the confined spaces typical of care home bedrooms, bathrooms, and toilets; the non-corrosive lightweight materials support use in wet environments such as bathrooms and wet rooms without degradation of the frame, and the wipe-clean surfaces meet NHS IPC decontamination requirements for equipment used in multiple rooms.
- 170kg SWL - Promotes Active Transfer - PUWER 1998 - NCL-ROMS400801334 - SWL 170kg (27 stone); dimensions 980 x 605 x 1120mm; the QuickMove promotes active user participation during transfer, supporting rehabilitation goals and reducing carer physical effort per MHOR 1992; not a hoisting device; subject to PUWER 1998 competency training and MHOR 1992 risk assessment; physiotherapist confirmation of weight-bearing status required before use; product code NCL-ROMS400801334.
QuickMove 170 Transfer Aid - 170kg SWL - Adjustable Leg Support - Angled Seats - Compact Frame
The QuickMove 170 is a compact adjustable sit-to-stand transfer aid for residents with partial weight-bearing capacity, featuring height and width-adjustable lower leg support, angled seat cushions that open for lateral access, and a non-corrosive wipe-clean frame suitable for wet environments. SWL 170kg. Dimensions: 980 x 605 x 1120mm. Not a hoisting device. Subject to PUWER 1998 and MHOR 1992. Physiotherapy weight-bearing assessment required before use. NCL-ROMS400801334.
Specifications
| Specification | Detail |
|---|---|
| Safe Working Load | 170kg (27 stone) |
| Length | 980mm |
| Width | 605mm |
| Height | 1120mm |
| Leg Support | Height and width adjustable |
| Seat Cushions | Angled; openable for lateral access |
| Frame Material | Non-corrosive lightweight - suitable for wet environments |
| Cover | Wipe-clean for NHS IPC compliance |
| Reference | NCL-ROMS400801334 |
| Compliance | PUWER 1998; MHOR 1992 (not subject to LOLER 1998) |
Regulatory Compliance
The QuickMove 170 is a transfer aid, not a hoisting device, and is not subject to LOLER 1998. PUWER 1998 requires documented staff competency training. MHOR 1992 requires a risk assessment for each resident confirming partial weight-bearing status, SWL not exceeded, and transfer technique appropriate. A physiotherapist must confirm weight-bearing capacity and authorise active transfer before the device is introduced for a resident. Equipment records must note the product code for CQC Regulation 12 compliance.
Frequently Asked Questions
How does the QuickMove 170 compare to the Olympic Turner (ID 261), and when is each more appropriate?
Both the QuickMove 170 and the Olympic Turner are sit-to-stand partial weight-bearing transfer aids, but they differ in adjustability, size, and feature set. The Olympic Turner is a larger device (height 1201mm, unit weight 19kg) with a 360-degree turning radius, independent locking rear brakes, and compatibility with Freeway gait belts; it is suited to transfers requiring multiple directional options and the additional security of a belt system. The QuickMove 170 is more compact (980 x 605 x 1120mm) and lighter, making it more appropriate for tight spaces such as small bathrooms or between close furniture; its angled seat cushions that open for lateral access make it suitable for toilet transfers where the device must approach from the side; and its non-corrosive frame makes it explicitly suitable for wet environments. The QuickMove's lower SWL (170kg vs 160kg for the Turner; both are within a similar clinical range) and adjustable leg support make it more customisable for individual resident dimensions. The Olympic Turner's belt compatibility and 360-degree turning make it more versatile for complex multi-surface transfers in larger spaces. The physiotherapist's assessment of the transfer route, space constraints, and resident's specific transfer requirements should guide the selection between the two products.
What does opening the seat cushions allow, and when should this configuration be used?
The seat cushions of the QuickMove 170 can be folded or opened to the side, creating a more open entry zone at the front of the device. This configuration is used when the device needs to approach and position around the resident's legs from the side or front while the resident is seated on a surface that the device cannot fully face - for example, when the resident is seated on a toilet where the front of the toilet seat is adjacent to the toilet cistern or wall and the device must approach from the side. With the cushions in the standard closed position, the angled surface extends forward from the device's frame; with the cushions open, the extended surface is removed, allowing the device's frame to move closer to the resident's knees before the cushions are redeployed. After the device is correctly positioned against the resident's lower legs with the frame in the appropriate position, the cushions are closed back to their support position before the transfer begins. The carer must confirm the cushions are fully engaged in their support position before the resident uses them for buttock support during the transfer; a partially open cushion that the resident presses against during rising may not provide adequate support and could rotate under the load.
NCL-ROMS400801334
- Adjustable Height and Width for Individual Fit - the QuickMove 170 provides height and width adjustment of the lower leg support, accommodating different leg lengths and widths between residents without requiring a separate product for each size; the height adjustment ensures the knee pad is at the correct position relative to the resident's knee for effective support during the standing phase, and the width adjustment allows the leg support to accommodate different inter-knee distances; this adjustability makes the QuickMove appropriate for both standard and bariatric leg profiles within its 170kg SWL.
- Angled Seat Cushions for Buttock Support During Transfer - the angled seat cushions support the resident's buttocks during the movement phase between sitting and standing, providing a surface that the resident can press against to assist the sitting-to-rising movement without fully bearing their weight on their legs at the initiation of the transfer; the cushions can be opened (folded aside) to allow access from a wheelchair or toilet where the folded position is needed for the device to approach the resident without the cushions obstructing entry from the side.
- Compact Lightweight Frame for Tight Care Environments - at 980mm length and 605mm width, the QuickMove 170 is smaller than the Olympic Turner and is specifically designed to be compact and manoeuvrable in the confined spaces typical of care home bedrooms, bathrooms, and toilets; the non-corrosive lightweight materials support use in wet environments such as bathrooms and wet rooms without degradation of the frame, and the wipe-clean surfaces meet NHS IPC decontamination requirements for equipment used in multiple rooms.
- 170kg SWL - Promotes Active Transfer - PUWER 1998 - NCL-ROMS400801334 - SWL 170kg (27 stone); dimensions 980 x 605 x 1120mm; the QuickMove promotes active user participation during transfer, supporting rehabilitation goals and reducing carer physical effort per MHOR 1992; not a hoisting device; subject to PUWER 1998 competency training and MHOR 1992 risk assessment; physiotherapist confirmation of weight-bearing status required before use; product code NCL-ROMS400801334.