Mobile Commode Chair - stylish, hygienic and comfortable commode with wheeled mobility.
- Welded Upholstery Prevents Fluid Ingress at Seam Lines - the padded seat cushion uses welded (heat-sealed) seams rather than stitched seams; stitched seams in upholstered care equipment create needle-hole perforations along the seam line that allow urine, wash water, and cleaning products to penetrate into the foam padding beneath the cover fabric; this fluid ingress creates a reservoir for bacterial growth within the foam that cannot be reached by surface wipe-down decontamination; heat-welded seams create an impermeable bond at the seam edge that prevents fluid ingress entirely, making the seat hygienically equivalent to a moulded plastic surface at the seam while retaining the comfort of padded upholstery at the sitting surface.
- Four Braked Castors and Pram-Style Push Handles for Room-to-Room Mobility - the four braked castors allow the mobile commode to be wheeled between the resident's bedroom and the bathroom or shower room without requiring the resident to be transferred to a separate transport chair; the carer pushes the commode with the resident seated using the pram-style ergonomic push handles, which are positioned at a comfortable pushing height; at the destination, all four brakes are applied to prevent any movement of the commode during the toileting or hygiene event.
- Detachable Armrests and Swing-Away Footrests for Transfer Access - the detachable armrests can be fully removed to allow lateral transfer onto the commode from the side without the resident having to navigate over an armrest; after transfer, the armrests are reattached to provide support during the seated period; the swing-away footrests pivot outward to allow close frontal approach when the commode is positioned over a toilet aperture or when the carer needs front access.
- 190kg SWL - Pan and Lid Included - 14.3kg - NCL-HMC110I - SWL 190kg; commode pan capacity 5-10 litres with lid; seat height 500mm; seat depth 430mm; under-seat clearance 425mm; width between arms 430mm; net weight 14.3kg; powder-coated steel matte grey frame; vinyl backrest; product code NCL-HMC110I.
Mobile Commode Chair - 190kg SWL - Welded Upholstery - Four Braked Castors - Pram Handles
The Mobile Commode Chair provides room-to-room wheeled toileting with four braked castors and pram-style push handles, welded (heat-sealed) upholstered seat for impermeable seam hygiene, detachable armrests and swing-away footrests for lateral transfer access, and a supplied commode pan and lid. SWL 190kg. Seat height 500mm. Under-seat clearance 425mm. Net weight 14.3kg. Powder-coated steel matte grey frame. Vinyl backrest. NCL-HMC110I.
Specifications
| Specification | Detail |
|---|---|
| Maximum User Weight | 190kg |
| Seat Height | 500mm |
| Seat Depth | 430mm |
| Width Between Arms | 430mm |
| Under Seat Clearance | 425mm |
| Overall Dimensions | 539mm (H) x 600mm (L) x 576mm (W) |
| Handle Height | 940mm |
| Footprint | 515 x 570mm |
| Net Weight | 14.3kg |
| Pan Capacity | 5 - 10 litres (pan and lid supplied) |
| Frame | Powder-coated steel - matte grey |
| Seat Upholstery | Padded - welded (heat-sealed) seams |
| Backrest | Vinyl |
| Reference | NCL-HMC110I |
Regulatory Compliance
The Mobile Commode Chair is a medical device. CQC Regulation 10 (dignity and respect) requires that the toileting procedure is conducted with appropriate privacy and dignity regardless of the equipment used. All four brakes must be confirmed applied before the resident uses the commode at any position. Armrests must be confirmed fully attached and locked before the resident sits; a partially attached armrest may detach under lateral load during transfers. Equipment records must note the product code and confirm the 190kg SWL for each resident's weight. IPC requires the commode pan to be emptied, cleaned, and decontaminated after every use per the care setting's waste handling protocol.
Frequently Asked Questions
Why does welded upholstery matter clinically and how can a carer tell the difference between welded and stitched seams?
In stitched seam upholstery, the needle passes through both layers of fabric and through the foam beneath during manufacture; each needle pass creates a small hole, and a typical seam has hundreds of these holes over its length. During use in a commode or shower chair context, any liquid at the seat surface - urine, wash water, cleaning product - can enter through these needle holes by capillary action and saturate the underlying foam; the foam then acts as a reservoir for bacteria that cannot be removed by surface wiping, even with effective cleaning chemicals, because the chemical cannot penetrate the foam volume that the liquid has reached. Heat-welded (also called heat-sealed) seams fuse the fabric layers together using heat and pressure without perforation; the bonded seam is impermeable because there are no holes. Visually, a welded seam has a continuous smooth fusion line without the visible thread running along the seam edge that characterises stitched seams; if thread is visible along the seam, the seam is stitched. Over time, a welded seam that is in good condition should not show any delamination, cracking, or colour change at the seam line; any of these signs indicate that the weld is failing and fluid ingress is possible, and the seat should be assessed for replacement.
What is the correct procedure for emptying and decontaminating the commode pan after use?
The commode pan decontamination procedure must follow the care setting's IPC protocol for waste handling, which typically specifies: don personal protective equipment (PPE) including gloves and apron before handling the pan; remove the pan from beneath the commode seat by releasing the pan retention mechanism; dispose of the waste content in the appropriate clinical waste stream (typically directly into the toilet or macerator if the pan is not a single-use disposable); rinse the pan with cold water before applying cleaning product to prevent protein fixation from hot water; apply the care setting's approved commode pan cleaning solution at the correct dilution and contact time per the product instructions; rinse thoroughly; and inspect the pan for cracks or damage that would prevent effective decontamination, replacing the pan if such damage is found. The pan should be dried before being refitted beneath the commode seat to prevent moisture accumulation beneath the seat. The pan decontamination must be recorded in the IPC cleaning log if required by the care setting's policy, and the cleaning log must be available for CQC inspection as evidence of the infection control protocol compliance.
NCL-HMC110I
- Welded Upholstery Prevents Fluid Ingress at Seam Lines - the padded seat cushion uses welded (heat-sealed) seams rather than stitched seams; stitched seams in upholstered care equipment create needle-hole perforations along the seam line that allow urine, wash water, and cleaning products to penetrate into the foam padding beneath the cover fabric; this fluid ingress creates a reservoir for bacterial growth within the foam that cannot be reached by surface wipe-down decontamination; heat-welded seams create an impermeable bond at the seam edge that prevents fluid ingress entirely, making the seat hygienically equivalent to a moulded plastic surface at the seam while retaining the comfort of padded upholstery at the sitting surface.
- Four Braked Castors and Pram-Style Push Handles for Room-to-Room Mobility - the four braked castors allow the mobile commode to be wheeled between the resident's bedroom and the bathroom or shower room without requiring the resident to be transferred to a separate transport chair; the carer pushes the commode with the resident seated using the pram-style ergonomic push handles, which are positioned at a comfortable pushing height; at the destination, all four brakes are applied to prevent any movement of the commode during the toileting or hygiene event.
- Detachable Armrests and Swing-Away Footrests for Transfer Access - the detachable armrests can be fully removed to allow lateral transfer onto the commode from the side without the resident having to navigate over an armrest; after transfer, the armrests are reattached to provide support during the seated period; the swing-away footrests pivot outward to allow close frontal approach when the commode is positioned over a toilet aperture or when the carer needs front access.
- 190kg SWL - Pan and Lid Included - 14.3kg - NCL-HMC110I - SWL 190kg; commode pan capacity 5-10 litres with lid; seat height 500mm; seat depth 430mm; under-seat clearance 425mm; width between arms 430mm; net weight 14.3kg; powder-coated steel matte grey frame; vinyl backrest; product code NCL-HMC110I.